1-8-1-regulirovka-polozheniya-sidenijj.html
1.8.1. Adjustment of provision of seatsFor ensuring the most convenient landing of people of different growth and a constitution the provision of seats of the driver and forward passenger can be changed both in the longitudinal direction, and on a back tilt angle. Besides, also adjustment of a head restraint on height is possible.
PREVENTION
Regulate the provision of a seat of the driver only on the motionless car. If in attempt of adjustment in the movement you indistinctly record a seat in the longitudinal direction and it will unexpectedly move, then it is possible to lose control over the car.
|
For adjustment of provision of front seats in the longitudinal direction pull the handle of the blocking lever up and move a seat on a sled to a comfortable position. After installation of a seat lower the handle and small movements of a seat back and forth achieve its reliable fixing.
For adjustment of an inclination of a back pull the hinge lever handle located on the left side of a seat up, and move a seatback to a comfortable position.
Head restraints of front seats can be regulated on height: press a clamp and move a head restraint up or down on the required height. The optimum provision of a head restraint — its top edge is located flush with the top part of the head.
NOTE
For people of very high growth lift a head restraint in extreme top situation, for people of very low growth lower a head restraint in extreme lower situation.
|
If necessary (for example, for unfolding of a seat in sleeping situation) the head restraint can be removed.
The back of a back seat can be put completely, on 2/3 or 1/3. To put a back …
… pull a clamp up …
… also put the left part of a back (2/3 seatbacks). The right part of a seatback develops similarly.
|