|
10-19-4-proverka-i-zamena-vyklyuchatelya-sveta-zadnego-khoda.html
10.19.4. Check and replacement of the switch of light of a backing
The switch of light of a backing is installed in the top part of a case of the transmission.
You will need a key "on 19".
1. Disconnect a wire from the minus plug of the rechargeable battery.
|
|
|
|
2. Wring out a clamp and disconnect a block of a plait of wires from the sensor.
|
3. Turn out the sensor …
|
4. … also remove it from the car.
5. Remove a sealing washer from the switch.
|
NOTE
Replace strongly pressed out washer new.
|
|
|
|
|
6. For check of the switch connect to its conclusions a tester in the ohmmeter mode. Resistance has to strive for infinity.
|
7. Press a switch plunger — resistance has to reduce to zero. Otherwise the switch is faulty and it needs to be replaced.
|
8. Establish details as it should be, the return to removal.
| 