Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Features of a design
10.2. Assembly blocks
10.3. Rechargeable battery
10.3.1. Features of a design
10.3.2. Possible malfunctions of the rechargeable battery, their reason and ways of elimination
10.3.3. Removal and installation of the rechargeable battery
10.3.4. Charging of the rechargeable battery
10.3.5. Replacement of tips of wires of the rechargeable battery
10.4. Generator
10.5. Starter
10.6. Switch (lock) of ignition
10.7. Control system of the engine
10.8. Lighting, light and sound alarm system
10.9. Replacement of a motor-reducer of a screen wiper of a wind window
10:10. Removal and installation of a washer of glass of a wind window
10:11. Removal and installation of the electric motor of the main fan of a radiator of the cooling system of the engine
10:12. Removal and installation of the electric motor of the additional fan of a radiator of the cooling system of the engine
10:13. Back window glass electrical heating
10:14. Removal and installation of the boss of the lighter
10:15. Combination of devices
10:16. Dashboard switches
10:17. Replacement of control units of electrowindow regulators
10:18. Automobile audio system
10:19. Replacement of sensors and switches
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








59d80679


10-3-3-snyatie-i-ustanovka-akkumulyatornojj-batarei.html

10.3.3. Removal and installation of the rechargeable battery

You will need a key "on 10".
1. Weaken an inhaling of a nut of a coupling bolt of a tip of a wire …
2. … also disconnect a wire from the minus plug of the rechargeable battery.
3. Cast away a protective cap …
4. … weaken an inhaling of a nut of a coupling bolt of a tip of a wire …
5. … also disconnect a wire from the plus plug of the rechargeable battery.
6. Weaken an inhaling of nuts of fastening of a clamping level.
7. Bring couplers out of openings of the shelf of the rechargeable battery …
8. … also remove a clamping level assembled with couplers.
9. Remove the rechargeable battery from the car.
10. Install the rechargeable battery as it should be, the return to removal. Before connection of wires smooth out plugs of the battery and internal surfaces of tips of wires a fine-grained emery paper. Connect wires as it should be, the return to removal, observing polarity. After connection of wires to plugs of the battery apply on metal tips of wires and the open surfaces of plugs a thin layer of Litol-24 lubricant or similar (copper-bearing conducting lubricants are most preferable).

"previous page
10.3.2. Possible malfunctions of the rechargeable battery, their reason and ways of elimination
following page"
10.3.4. Charging of the rechargeable battery