10-5-3-snyatie-i-ustanovka-startera.html
10.5.3. Removal and installation of a starterThe starter is established on a coupling case from the back party of the power unit.
It will be required to you: a key "on 13", face heads "on 10", "on 13".
1. Disconnect a wire from the minus plug of the rechargeable battery.
|
|
2. Turn off a nut of fastening of a power wire …
|
3. … also remove a wire from a contact bolt of the traction relay.
|
|
|
4. Turn off a nut of fastening of the operating wire …
|
5. … also disconnect a wire from the traction relay.
|
|
|
6. Turn off two nuts of fastening (the second nut is located from the opposite side of the case of a starter, on the top hairpin the additional nut fixed a wire of "weight", do not forget to establish it into place at assembly)...
|
7. … also remove a starter.
|
8. Establish a starter as it should be, the return to removal.
|