|
11-11-2-snyatie-i-ustanovka-zamka-kryshki-lyuka-nalivnojj-truby.html
11.11.2. Removal and installation of the lock of a cover of the hatch of a bulk pipe of the fuel tank and its driveIt will be required to you: all tools necessary for removal of back facing of the left threshold of a floor and facings of a luggage carrier, and also a face head "on 10".
|
|
|
|
3. Turn out through a window in a floor rug a bolt of fastening of the block of handles.
|
4. Unbend edge of a rug and take from under a rug the block of handles together with cables of drives, having stretched the block through a window in a floor cross-piece.
|
5. Take out a tip of a cover of a cable of the drive of the lock of a cover of the hatch of a bulk pipe of the fuel tank from a cut of an arm of the block of levers and, having taken out a cable tip from a lever cut, disconnect a cable.
|
NOTE
If necessary similarly disconnect from the block of handles a luggage carrier lock drive cable (with a yellow tip) and remove the block of handles.
|
|
|
|
|
6. Take a cable cover from holders on the left threshold of a floor …
|
7. … on the left sidewall in a luggage carrier …
|
|
|
|
|
8. … and on the amplifier of the panel of a back.
|
9. Open a cover of the hatch of a bulk mouth of the fuel tank and take from a nest in the right back wing the lock of a cover of the hatch of a bulk pipe of the fuel tank, overcoming resistance of its clamps.
|
|
|
|
|
10. Disconnect a cable tip from the lock lever …
|
11. … separate the case of the lock and a tip of a cover of a cable and remove the lock.
|
12. Remove a drive cable, taking both of its ends in a luggage carrier.
13. Examine a lock sealant. Replace strongly hardened or damaged sealant.
14. Install as it should be, the return to removal, the lock of a cover of the hatch of a bulk pipe of the fuel tank and its drive, and also all removed details.
| 