11-12-3-snyatie-i-ustanovka-zadnego-sidenya.html
11.12.3. Removal and installation of a back seatThe pillow of a back seat integral can be also removed entirely. The back of a back seat consists of two parts, each of which can be removed separately. Below removal of the right part of a back is shown, the left part is removed similarly.
It will be required to you: a key "on 12" (it is more convenient to use a face head), a stripper for removal of percussion caps or the screw-driver with a flat edge.
1. Having raised a forward part of a pillow of a back seat, bring two brackets of its fastening out of openings on a body on the right and at the left.
NOTE
So brackets of fastening of a pillow look …
… and so — openings in a body.
|
|
|
2. Wring out an upholstery in a back part of a pillow on the right and at the left to get access to two bolts of its fastening to a body...
|
3. … turn out bolts …
|
|
|
4. … also take a pillow of a back seat from interior of the car.
|
5. Access to bolts of fastening of the right part of a back of a back seat is closed by edge of the upholstery of a luggage carrier attached to a body by three percussion caps. Disconnect edge of an upholstery from a body …
|
|
|
6. … having removed percussion caps a special stripper or having hooked the screw-driver …
|
7. … turn out two bolts of fastening of the right part of a back to an arm …
|
|
|
8. … shift the right part of a back down and to the left …
|
9. … to take a back clamp from an opening in a body, and remove the right part of a back of a back seat from the car.
|
|
|
10. In need of replacement of the lock of a back of a back seat screw together the button from draft of the drive of the lock …
|
11. … turn off two nuts of fastening of the lock to a seat framework …
|
|
|
12. … also remove the lock.
|
|
14. Establish a back seat and all removed details as it should be, the return to removal.
|