11.14.4. Replacement of a back seat belt

In this subsection replacement of a seat belt of average and left passengers on a back seat is shown. The seat belt of the right passenger is replaced similarly.

You will need a key "on 17".

1. Remove a pillow of a back seat (see. "Removal and installation of a back seat").

    

NOTE Locks of seat belts of the right and average passengers on a back seat … … and also the seat belt of the average passenger and the lock of a seat belt of the left passenger are attached by bolts to the body basis.

2. Turn out fastening bolts …	3. … also remove locks of seat belts of the right and average passengers on a back seat …

4. … and also seat belt of the average passenger and lock of a seat belt of the left passenger.	5. Weaken an inhaling of a bolt of the lower fastening of a seat belt of the left passenger …

6. … also turn out a bolt.	7. Overcoming effort of clamps, take an opening fringing from an opening of facing of the left back rack of a body.

8. Disconnect facing from the left back rack (see. "Removal and installation of facings of salon").

9. Pass an opening fringing together with a belt buckle in a facing opening …	10. … also remove facing from a seat belt.

11. Weaken an inhaling of a bolt of the top fastening of a seat belt of the left passenger …	12. … also turn out a bolt.

13. Pass a belt buckle through a facing opening fringing …	14. … also remove a fringing from a belt.

15. Extend a belt through a gap between facing of the shelf of a back and a back rack.	16. In a luggage carrier turn out a bolt of fastening of the inertial coil of a belt to a body …

17. … also take off a belt.

18. Establish back seat belts and all removed details as it should be, the return to removal.