|
11-14-5-snyatie-i-ustanovka-ehlektronnogo-bloka-upravleniya-dopolnitelnojj-sistemojj-passivnojj-bezopasnosti.html
11.14.5. Removal and installation of an electronic control unit additional system of passive safetyIt will be required to you: all tools necessary for removal of facing of a tunnel of a floor, and TORX T30 key.
1. Disconnect a wire from the minus plug of the rechargeable battery.
|
|
|
|
3. Cast away a clamp of a block of a plait of wires of an electronic control unit …
|
4. … also disconnect a block from the block.
|
|
|
|
|
5. Turn out three bolts of fastening of the control unit to the body basis …
|
6. … also remove the block.
|
|
NOTE
Pay attention to marking of the control unit, for replacement buy the block with the same marking.
|
7. Establish an electronic control unit by system of passive safety and all removed details as it should be, the return to removal. The arrow on the case of the block has to specify forward.
| 