11-20-snyatie-i-ustanovka-oblicovok-bagazhnika.html
11:20. Removal and installation of facings of a luggage carrierThe facings of a luggage carrier formed from plastic are attached to body panels by percussion caps. The trunk floor rug from nonwoven carpet fabric is laid on a trunk floor and also attached to it by four percussion caps located in a forward part of a rug.
You will need the screw-driver with a flat edge.
1. Facing of a back left lamp is attached to a body by four percussion caps, three of which at the same time attached also a back part of facing of an arch of a back wheel. Take percussion caps …
|
|
2. … having hooked the screw-driver …
|
3. … also remove facing.
|
NOTE
Facing of a back right lamp is removed similarly.
|
4. For removal of facing of an arch of a back left wheel remove facing of a back lamp (see subitem 1-3) as three percussion caps of its fastening at the same time fixed also facing of an arch …
|
|
5. … take a percussion cap of fastening of facing of an arch to a body back partition …
|
6. … and two percussion caps of fastening of back facing of a sidewall which are at the same time fixing and facing of an arch.
|
7. Remove facing of an arch of a back left wheel.
NOTE
Facing of an arch of a back right wheel is removed similarly.
|
8. For removal of facing of the panel of a back take four percussion caps of fastening of its top part …
|
|
9. … then, having raised a back edge of a rug of a luggage carrier and a cover of a niche for a spare wheel, two percussion caps of fastening of facing to body longerons at the left and on the right …
|
10. … and one percussion cap of fastening of facing to a trunk floor located on the center.
|
11. Remove facing of the panel of a back.
12. For removal of a rug of a trunk floor take four percussion caps of its fastening located along a forward edge of a rug.
13. Establish facings of a luggage carrier and a rug of a floor as it should be, the return to removal.
|