11.3.1. Removal, dismantling and installation of a front bumper

It will be required to you: all tools necessary for removal of mudguards and flaps of forward wheels (see. "Removal and installation of mudguards of wheels and flaps"), and also a key "on 10", a face head "on 12", the screw-driver with a crosswise edge.

1. On both sides of the car remove mudguards and flaps of forward wheels (see. "Removal and installation of mudguards of wheels and flaps").

2. Open a cowl, establish it on an emphasis and turn off on one nut of the top fastening of a front bumper to a body at the left …	3. … and on the right.

4. In arches of forward wheels turn off two nuts of forward fastening of a bumper to a body …	5. … turn out on one bolt of the lower fastening …

6. … on one screw of side fastening …	7. … also remove a front bumper.

8. If necessary turn out five screws of fastening of a framework of the power absorbing element to the top edge of a bumper, four screws — to the lower edge of a bumper …	9. … remove a framework …

10. … and the power absorbing element.

11. Collect and establish a front bumper, and also all removed details as it should be, the return to removal.