11.3.2. Removal, dismantling and installation of a rear bumper

It will be required to you: all tools necessary for removal of mudguards and flaps of back wheels (see. "Removal and installation of mudguards of wheels and flaps"), facings of back lamps and the panel of a back (see. "Removal and installation of facings of a luggage carrier"), and also a face head "on 10", the screw-driver with a crosswise edge.

1. On both sides of the car remove mudguards and flaps of back wheels (see. "Removal and installation of mudguards of wheels and flaps").

2. Open a trunk lid and remove facings of back lamps and the panel of a back (see. "Removal and installation of facings of a luggage carrier").

3. On both sides of a luggage carrier turn off nuts and turn out bolts of fastening of the ends of a bumper to a body.	4. From within both arches of back wheels turn out on one bolt of fastening of the ends of a bumper to a body.

5. Turn out four screws of fastening of a bumper to the back panel …	6. … also remove a rear bumper.

7. If necessary turn off two nuts of fastening of the side power absorbing element from within a luggage carrier …	8. … also remove the power absorbing element. Similarly remove the second side power absorbing element.

9. If necessary turn out four screws of fastening of the central power absorbing element to a rear bumper …

NOTE Screws of fastening of the central power absorbing element are so located to a bumper.

10. … also remove the central power absorbing element.

11. Collect and establish a rear bumper, and also all removed details as it should be, the return to removal.