Chevrolet Lanos (since 2004 release)
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in way
	4. Maintenance
	5. Engine
	6. Transmission
	7. Running gear
	8. Steering
	9. Brake system
	10. Electric equipment
	11. Body
		11.1. Features of a design
		11.2. Possible malfunctions of a body, their reason and ways of elimination
		11.3. Removal, dismantling and installation of bumpers
		11.4. Removal and installation of facing of a radiator
		11.5. Removal and installation of mudguards of wheels and flaps
		11.6. Removal and installation of a forward wing
		11.7. Removal and installation of a lattice of a box of airinflow
		11.8. Cowl
		11.9. Doors
			11.9.1. Removal and installation of an upholstery of a forward door
			11.9.2. Replacement of glass of a forward door
			11.9.3. Replacement of a window regulator of a forward door
			11.9.4. Replacement of the external handle of a forward door
			11.9.5. Replacement of the internal handle of the drive of the lock of a forward door
			11.9.6. Replacement of the switch of the lock of a forward door
			11.9.7. Replacement of the lock of a forward door
			11.9.8. Replacement of the limiter of opening of a forward door
			11.9.9. Removal and installation of a forward door
			11.9.10. Removal and installation of an upholstery of a back door
			11.9.11. Replacement of glass of a back door
			11.9.12. Replacement of a window regulator of a back door
			11.9.13. Replacement of the external handle of a back door
			11.9.14. Replacement of the internal handle of the drive of the lock of a back door
			11.9.15. Replacement of the lock of a back door
			11.9.16. Replacement of the limiter of opening of a back door
			11.9.17. Removal and installation of a back door
		11:10. Trunk lid
		11:11. Cover of the hatch of a bulk pipe of the fuel tank
		11:12. Seats
		11:13. Removal and installation of facing of a tunnel of a floor
		11:14. System of passive safety (SRS)
		11:15. Rear-view mirrors
		11:16. Dashboard
		11:17. Heater and conditioner
		11:18. Fittings of salon
		11:19. Removal and installation of facings of salon
		11:20. Removal and installation of facings of a luggage carrier
		11:21. Screen wiper of a wind window
		11:22. Replacement of a motionless glazing of a body
		11:23. Removal and installation of the shelf of fastening of the rechargeable battery
		11:24. Care of a body
	12. Wheels and tires
	13. Purchase of spare parts
	14. A trip on HUNDRED
	15. Winter operation of the car
	16. Preparation for checkup
	17. Advice to the beginning mechanic
	18. Appendices
	19. Schemes of electric equipment

11-9-14-zamena-vnutrennejj-ruchki-privoda-zamka-zadnejj-dveri.html

11.9.14. Replacement of the internal handle of the drive of the lock of a back door

You will need the screw-driver with a crosswise edge.

1. Remove an upholstery of a back door and a moisture protective film (see. "Removal and installation of an upholstery of a back door").


2. Turn out the screw of fastening of the internal handle to the door panel …	3. … shift the internal handle forward and take from a door assembled with drafts.


4. Take drafts from the holder …	5. … disconnect drafts from levers of the internal handle and remove the handle.

6. Install the internal handle and all removed details as it should be, the return to removal.

"previous page
11.9.13. Replacement of the external handle of a back door

following page"
11.9.15. Replacement of the lock of a back door