11-9-3-zamena-steklopodemnika-perednejj-dveri.html
11.9.3. Replacement of a window regulator of a forward doorWindow regulators of forward doors are equipped with the electric drive. In this subsection only removal and installation directly of an electrowindow regulator are described. Removal and installation of the control unit of electrowindow regulators are described in section 10 "Electric equipment" (see. "Replacement of control units of electrowindow regulators").
You will need a key "on 10".
NOTE
It is optional to extract glass from a door, it is enough to disconnect of it from a window regulator and to record in extreme top situation, for example, by means of the screw-driver, pieces of a chlorvinyl tube of suitable diameter or a painting adhesive tape.
|
|
|
3. Separate a block of a plait of wires of a window regulator.
|
4. Turn off seven nuts of fastening of a window regulator to the internal panel of a door …
|
|
|
5. … also take a window regulator from a door cavity through an assembly opening in its internal panel.
|
6. Establish a window regulator and all removed details as it should be, the return to removal.
|
|