11.9.7. Replacement of the lock of a forward door

It will be required to you: TORX T40 key, the screw-driver with a crosswise edge.

1. Remove an upholstery of a forward door and a moisture protective film (see. "Removal and installation of an upholstery of a forward door").

2. Remove the internal handle of the drive of the lock of a forward door (see. "Replacement of the internal handle of the drive of the lock of a forward door").

NOTE It is necessary to remove the internal handle because to disconnect drafts of the drive from the lock put on a door, very difficult. It is more convenient to remove the lock together with drafts, and in turn the detachment of drafts from the handle requires its removal.

3. Unfasten a plastic clamp of draft of the external handle and disconnect draft from the handle lever.	4. Similarly disconnect draft from the lock switch.

5. Turn out three screws of fastening of the lock to the door panel.	6. Remove the lock from the car, having brought him through a technological opening in the door panel.

7. If you change the lock, unfasten plastic clamps of drafts and disconnect from draft lock levers from the internal handle of the drive of the lock …	8. … draft of blocking …

9. … and draft from the external handle.	10. For removal of a latch of the lock of a forward door turn out two screws of its fastening to a body rack …

11. … also remove a latch.

12. Put the lock of a forward door and all removed details as it should be, the return to removal.

NOTE If necessary adjust the clearness of locking of the lock movement of a latch in the vertical or horizontal direction, having weakened its inhaling.