4.3.5. Cleaning of system of ventilation of a case

Over time in system of ventilation of a case of the engine the resinous deposits from crankcase gases complicating removal of these gases in engine cylinders for burning collect. Because of it pressure of gases in the engine increases and oil leaks through consolidations appear. In order that it was not, periodically clear and wash out system.

You will need the screw-driver with a flat edge.

GOOD ADVICE Clear system of ventilation of a case before each replacement of oil.

1. Weaken a collar inhaling …	2. … also disconnect the bringing hose of system of ventilation of a case from a camshaft case branch pipe. Similarly disconnect a hose from a branch pipe of the block of cylinders and remove it.

3. Squeeze the unbent short moustaches of a collar of fastening of the taking-away system hose to a camshaft case cover branch pipe, shift a collar on a hose …	4. … also remove a hose from a branch pipe.

5. Disconnect a hose of a small branch of system from the union of an inlet pipe located behind a pipe.	6. Squeeze the unbent short moustaches of a collar of fastening of the taking-away system hose to the union of the airbringing sleeve, shift a collar on a hose …

7. … disconnect a hose from a sleeve …	8. … also remove the taking-away hose of system of ventilation of a case of the engine assembled.

9. Wash out hoses gasoline or kerosene, blow compressed air and dry. Clean openings of unions and branch pipes for connection of hoses.

10. Uncover a head of the block of cylinders (see. "Replacement of laying of a cover of a head of the block of cylinders of the engine").

    

GOOD ADVICE At each removal of a cover of a head of the block of cylinders replace its laying new.

11. Wash out gasoline or kerosene maslootrazhatel, an internal surface of a cover of a head of the block of cylinders and its branch pipe.

12. Establish a cover of a head of the block of cylinders and hoses of system of ventilation of a case as it should be, the return to removal.