5-13-6-zamena-priemnojj-truby.html
5.13.6. Replacement of a reception pipe
1. Turn off three nuts of fastening of a flange of a reception pipe to a final collector...
GOOD ADVICE
Nuts of fastening of a flange of a reception pipe after long operation "burn" to hairpins. In order to avoid breakage of hairpins before an otvorachivaniye moisten threaded connections with WD-40 liquid (or structures, similar it) or kerosene.
We recommend to replace at each dismantling of connection nuts new as sides of nuts can be crumpled and at the subsequent inhaling (otvorachivaniya) can break absolutely then it will be very difficult to turn off a nut.
|
|
|
2. … and three nuts of fastening of a flange of a reception pipe to a flange of converter of the fulfilled gases (or to a pro-rate flange).
|
3. Remove a system suspension bracket pillow from an arm on a reception pipe …
|
|
|
4. … separate flanges of a reception pipe and converter …
|
5. … shift a flange of a reception pipe from hairpins of a final collector and remove a pipe.
|
|
|
6. Remove sealing laying from converter flanges...
|
7. … and final collector.
|
GOOD ADVICE
Replace new sealing laying between flanges of a reception pipe, converter (pro-rate) and a final collector at each dismantling of connection as strongly pressed out laying will not provide reliable consolidation.
|
8. Establish a reception pipe as it should be, the return to removal.
|
|