5.15.3. Removal and installation of an adsorber

The adsorber of system of catching of vapors of fuel is removed for check or replacement at emergence of persistent smell of the gasoline caused by its leakage. Besides, violation of tightness of an adsorber can become the reason of unstable operation of the engine idling up to its stop.

The adsorber is installed in the protection cover on the basis of a body on the right behind.

It will be required to you: a key "on 10", passatizh, the screw-driver with a crosswise edge, bokoreza.

1. Separate the pipeline of ventilation of the fuel tank, having squeezed its clamps.	2. Similarly separate the pipeline of removal of vapors of fuel in an inlet pipe.

3. Have a bite bokorezam (or knife) a collar of fastening of hoses and pipelines as it holds a hose of removal of vapors of fuel from an adsorber in an inlet pipe.

    

NOTE Collar of fastening of hoses and pipelines of one-time use.

4. Turn out a bolt of fastening of a casing of an adsorber to an arm on the basis of a body …	5. … shift an adsorber on arm guides in the direction of the movement of the car forward …

6. … also remove an adsorber from the car, extending its atmospheric hose from the protection cover of a bulk pipe of the fuel tank down.	7. In need of replacement of an adsorber turn out three screws of fastening of a cover of its casing …

8. … also cast away a cover.	9. Having squeezed clamps of steam hoses, remove their tips from adsorber branch pipes …

10. … also take hoses from its casing.	11. Weaken a collar of fastening of an atmospheric hose, having squeezed passatizham its unbent ears, shift a collar on a hose …

12. … also remove a hose from an adsorber branch pipe.	13. Take an adsorber from a casing.

14. Remove the rubber sealing plug of an atmospheric hose from an adsorber branch pipe …	15. … or take the plug from a hose if it remained in it. Replace strongly hardened or cracked sealing plug.

16. Collect and establish an adsorber as it should be, the return to dismantling and removal.