5-7-1-zamena-prokladki-kryshki-golovki-bloka-cilindrov.html
5.7.1. Replacement of laying of a cover of a head of the block of cylindersIf the oil leak from under a cover of a head of the block of cylinders did not manage to be eliminated with tightening of bolts of fastening of a cover, replace its laying.
It will be required to you: a key "on 10", the screw-driver with a flat edge, passatizh.
|
|
1. Weaken a collar of fastening of a hose of system of ventilation of a case of the engine to a branch pipe of a cover of a head of the block of cylinders, having squeezed passatizham its unbent ears, shift a collar on a hose …
|
2. … also disconnect a hose from a cover.
|
|
|
3. Turn out eight bolts of fastening of a cover of a head of the block of cylinders …
|
4. … also uncover.
|
|
|
5. Take laying from grooves of a cover and examine. Replace strongly pressed out, hardened or torn laying.
|
6. Carefully clear the privalochny surfaces of the case of the camshaft and a cover of a head of the block of cylinders of the remains of laying and sealant (at its existence).
|
USEFUL TIPS
For the best sealing before installation of new laying apply a thin film of sealant on the privalochny surface of the case.
After cleaning do not degrease the privalochny surface of the case. It will allow in case of use of sealant further without difficulties to uncover.
|
7. Lay laying in grooves of a cover of a head of the block of cylinders.
8. Establish a cover of a head of the block of cylinders and all removed details as it should be, the return to removal. Tighten bolts of fastening of a cover evenly cross-wise the moment specified in the appendix 1.
|