5-7-5-zamena-salnikov-kolenchatogo-vala.html
5.7.5. Replacement of epiploons of a bent shaftAt detection of traces of dribble of oil through epiploons of a bent shaft at first check whether the system of ventilation of a case is littered and whether hoses of system of ventilation of a case are pressed, if necessary eliminate malfunctions. If the leak of oil does not stop, replace epiploons.
Sign of need of replacement of a forward epiploon of a bent shaft is the oil leak through its edge. At the same time oil is sprayed by the rotating pulley of a bent shaft owing to what greasy are all forward part of the engine and a belt of the drive of the gas-distributing mechanism.
For replacement of a forward epiploon of a bent shaft execute the following.
1. Disconnect a wire from the minus plug of the rechargeable battery.
3. Take off a belt of the drive of the gas-distributing mechanism (see. "Replacement and adjustment of a tension of a belt of the drive of the gas-distributing mechanism and replacement of its tension roller").
|
|
5. Having hooked the screw-driver, take an epiploon from the case of the oil pump.
|
6. Oil a working edge of a new epiploon engine and install it in the case of the oil pump, having oriented a working edge in the engine.
|
7. Press an epiploon in a pump housing against the stop by means of a mandrel. As a mandrel it is possible to use a head of the suitable size from tool kit or an old epiploon.
8. Establish details and knots as it should be, the return to removal.
Can be the reasons of oiling of clutch plates to flow an epiploon of a main shaft of the transmission or a back epiploon of a bent shaft.
Motor and transmission oils have a different smell therefore at a certain skill it is possible to determine by a smell, defective, what of epiploons.
GOOD ADVICE
There is one more way of definition like oil. Drip oil in the water poured in a vessel by a thin layer (it is possible in a pool). Gearbox oil will spread on all water surface in the form of an iridescent film, and motor will remain in the form of the drop similar to lentil grain.
|
For replacement of a back epiploon execute the following.
4. Examine an epiploon: if he lost tightness, in its lower part will be visible began to flow oils.
|
|
5. Having hooked the screw-driver, take an epiploon.
|
6. Oil engine a working edge of a new epiploon …
|
|
|
7. … establish it in a nest of the block of cylinders, having oriented a working edge in the engine, and accurately fill a working edge on a neck of a bent shaft.
|
8. Press an epiploon in a nest against the stop, using an old epiploon as a mandrel.
|
9. Establish the removed knots as it should be, the return to removal.
NOTE
At installation of a flywheel grease a carving part of bolts of its fastening with an anaerobic clamp of a carving.
|
|