|
6-1-3-zamena-vilki-i-podshipnika-vyklyucheniya-scepleniya.html
6.1.3. Replacement of a fork and bearing of switching off of couplingYou will need a key "on 13".
|
|
|
|
2. Turn out a bolt of fastening of a fork to a coupling switching off shaft...
|
3. … also take a shaft from a coupling case.
|
|
|
|
|
4. Remove a coupling switching off fork.
|
5. If necessary take top from a coupling case …
|
|
|
|
|
6. … and lower coupling switching off shaft plugs.
|
7. Remove the bearing of switching off of coupling from the directing plug.
|
8. Establish details as it should be, the return to removal. At installation of plastic plugs of a shaft of switching off of coupling pay attention to that the ledge (it is shown by an arrow on a photo of item 6) on the plug got to a groove on inflow of a case. Grease plugs with jellied lubricant. Before installation of the bearing of switching off of coupling grease the external surface of the directing plug with a thin layer of jellied lubricant.
| 