6-1-4-zamena-glavnogo-cilindra-privoda-vyklyucheniya-scepleniya.html
6.1.4. Replacement of the main cylinder of the drive of switching off of couplingIt will be required to you: keys "on 10", a face head "on 13", a special key "on 10" for nuts of pipelines, the extender, a neck, passatizh.
1. Turn off a stopper of a tank and pump out (for example, the big medical syringe) brake fluid from the section of a tank of the main brake cylinder feeding a coupling switching off hydraulic actuator.
NOTE
The tank, the general for the main cylinders of brakes and switching off of coupling, has three separate sections: two for separate contours of a hydraulic actuator of brakes and one for a coupling switching off hydraulic actuator.
|
NOTE
The broad tank of the cooling system of the engine needs to be removed for receiving access to the main cylinder of the drive of switching off of coupling. The tank can be not removed completely, it is enough to turn off two nuts of its fastening and to take a tank aside, without disconnecting from it hoses and without merging cooling liquid.
|
|
|
3. Passatizhami squeeze the unbent collar ears, shift a collar along the feeding hose …
|
4. … also disconnect a hose from the main cylinder.
|
|
|
5. Turn off a nut of fastening of a tube of a hydraulic actuator of switching off of coupling to the main cylinder …
|
6. … also take a tube aside.
|
|
|
8. Turn off two nuts of fastening of the main cylinder of the drive of switching off of coupling to a body …
|
9. … also remove the main cylinder.
|
|
|