Chevrolet Lanos (since 2004 release)
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in way
	4. Maintenance
	5. Engine
	6. Transmission
		6.1. Coupling
			6.1.1. Features of a design
			6.1.2. Removal and installation of coupling
			6.1.3. Replacement of a fork and bearing of switching off of coupling
			6.1.4. Replacement of the main cylinder of the drive of switching off of coupling
			6.1.5. Replacement of the working cylinder of the drive of switching off of coupling
			6.1.6. Replacement of a hose and tube of a hydraulic actuator of switching off of coupling
			6.1.7. Removal and installation of a pedal of coupling
			6.1.8. Pumping of a hydraulic actuator of switching off of coupling
		6.2. Transmission
		6.3. Drives of forward wheels
	7. Running gear
	8. Steering
	9. Brake system
	10. Electric equipment
	11. Body
	12. Wheels and tires
	13. Purchase of spare parts
	14. A trip on HUNDRED
	15. Winter operation of the car
	16. Preparation for checkup
	17. Advice to the beginning mechanic
	18. Appendices
	19. Schemes of electric equipment

Шкафчики для раздевалок читать дальше.

6-1-6-zamena-shlanga-i-trubki-gidroprivoda-vyklyucheniya-scepleniya.html

6.1.6. Replacement of a hose and tube of a hydraulic actuator of switching off of coupling

It will be required to you: keys "on 10", "on 12" …

… a special key for nuts of the pipelines "on 10", passatizh.

1. Turn off a nut of fastening of a tube to a tip of a hose and take a tube aside.

NOTE

The shelf of fastening of the rechargeable battery is for descriptive reasons removed.


2. Remove the fixing bracket...	3. … also bring a hose tip out of an arm.


4. Turn out a bolt union and remove a hose...	5. … having paid attention to existence and a relative positioning of two copper sealing washers.

NOTE

Replace the pressed-out washers at assembly new.

6. Remove a broad tank of the cooling system (see. "Removal and installation of a broad tank").


7. Turn off a nut of fastening of a tube to the main cylinder of the drive of switching off of coupling …	8. … take a tube from the holder on a mudguard and pick up the phone.

9. Establish details as it should be, the return to removal, and remove air from a hydraulic actuator (see. "Pumping of a hydraulic actuator of switching off of coupling").