6-1-7-snyatie-i-ustanovka-pedali-scepleniya.html
6.1.7. Removal and installation of a pedal of couplingThe pedal of coupling is removed for replacement of plastic plugs of its axis and the plug of a finger of a fork of a pusher of the main cylinder of the drive of switching off of coupling at emergence of a scratch, jamming or at the increased side play, and also for replacement of a returnable spring at its damage.
It will be required to you: two keys "on 15", passatizh.
|
|
1. Disconnect a pusher of the main cylinder of the drive of switching off of coupling from a coupling pedal. For this purpose passatizham remove a lock washer of a finger of a fork of a pusher …
|
2. … also take a finger from openings of a fork and a pedal.
|
3. Holding a key a pedal axis from a provorachivaniye, turn off a key and an axis nut.
|
|
4. Take an axis from openings of a pedal and an arm …
|
5. … also remove a pedal, having brought a groove and the pedal lever out of gearing with a returnable spring
|
.
6. If necessary remove a returnable spring, having brought its unbent ends out of arm openings.
|
|
7. Remove the finger plug from a pedal …
|
8. … and two plugs of an axis.
|
9. Establish details as it should be, the return to removal.
PREVENTION
At installation of a pedal of coupling track that the groove and (see a photo of item 5) the lever of a pedal would enter gearing with a returnable spring.
|
|