Chevrolet Lanos (since 2004 release)
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in way
	4. Maintenance
	5. Engine
	6. Transmission
		6.1. Coupling
		6.2. Transmission
			6.2.1. Features of a design
			6.2.2. Possible malfunctions of the transmission, their reason and ways of elimination
			6.2.3. Replacement of oil in the transmission
			6.2.4. Replacement of epiploons of the transmission
			6.2.5. Removal and installation of the transmission
			6.2.6. Dismantling and assembly of the transmission and troubleshooting of its details
			6.2.7. Repair of a secondary shaft
			6.2.8. Repair of a main shaft
			6.2.9. Repair of the synchronizer
			6.2.10. Repair of differential
			6.2.11. Repair of the mechanism of gear shifting
			6.2.12. Repair of hinges of the drive of gear shifting
			6.2.13. Removal, installation and repair of the coulisse of a control lever transmission
			6.2.14. Adjustment of the drive of control of the transmission
		6.3. Drives of forward wheels
	7. Running gear
	8. Steering
	9. Brake system
	10. Electric equipment
	11. Body
	12. Wheels and tires
	13. Purchase of spare parts
	14. A trip on HUNDRED
	15. Winter operation of the car
	16. Preparation for checkup
	17. Advice to the beginning mechanic
	18. Appendices
	19. Schemes of electric equipment

6-2-11-remont-mekhanizma-pereklyucheniya-peredach.html

6.2.11. Repair of the mechanism of gear shifting

For repair the mechanism of gear shifting is removed from the transmission (see. "Dismantling and assembly of the transmission and troubleshooting of its details").

It will be required to you: a stripper for lock rings, the screw-driver, small beards, the hammer.


1. Beat out a pin of fastening of the spherical lever to a gear shifting shaft …	2. … also take a pin from a gear shifting mechanism cover.


3. Take out a switching shaft from openings of a cover and take the spherical lever from a cover.	4. Having hooked the screw-driver, take a switching shaft epiploon from a cover nest. Replace the worn-out, hardened or damaged epiploon.


5. Part a lock ring …	6. … also remove a lock ring, a flat washer, a spring from an axis of the switch of transfers …


7. … second flat washer …	8. … and switch.

9. Collect the gear shifting mechanism as it should be, the return to dismantling, having replaced the worn-out or damaged details.

NOTE

Dismantling of the elements of the mechanism of gear shifting located in the transmission is described above (see. "Dismantling and assembly of the transmission and troubleshooting of its details").