Chevrolet Lanos (since 2004 release)
	1. Car device
	2. Recommendations about operation
	3. Malfunctions in way
	4. Maintenance
	5. Engine
	6. Transmission
	7. Running gear
		7.1. Forward suspension bracket
		7.2. Back suspension bracket
			7.2.1. Features of a design
			7.2.2. Possible malfunctions of a back suspension bracket, their reason and ways of elimination
			7.2.3. Replacement of the shock-absorber of a back suspension bracket
			7.2.4. Replacement of a spring of a back suspension bracket
			7.2.5. Replacement of saylentblok of levers of a back suspension bracket
			7.2.6. Adjustment of bearings of a back nave
			7.2.7. Replacement of bearings of a back nave
			7.2.8. Replacement of a beam of a back suspension bracket
			7.2.9. Replacement of the stabilizer of cross stability of a back suspension bracket
	8. Steering
	9. Brake system
	10. Electric equipment
	11. Body
	12. Wheels and tires
	13. Purchase of spare parts
	14. A trip on HUNDRED
	15. Winter operation of the car
	16. Preparation for checkup
	17. Advice to the beginning mechanic
	18. Appendices
	19. Schemes of electric equipment

7-2-6-regulirovka-podshipnikov-zadnejj-stupicy.html

7.2.6. Adjustment of bearings of a back nave

It will be required to you: a face head "on 24", a dynamometer key, the screw-driver with a flat edge, flat-nose pliers.


1. You will hang out a back wheel, a vypressuyta …	2. … also take off a protective cap of a nave.


3. Take the forelock.	4. Rotating a hand a wheel, tighten a nave nut the moment of 20 N · m for self-installation of bearings.

5. Weaken a nut inhaling, having turned off it half way (180 °).

6. Again tighten a nut of fastening of a nave the moment of 1 N · m.

7. Install the new forelock and bend its ends.

PREVENTION

If cuts of a nut and an opening in a pin do not coincide, combine them, turning off a nut.

8. Before installation of a protective cap put lubricant in his internal cavity.