Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.2. Back suspension bracket
7.2.1. Features of a design
7.2.2. Possible malfunctions of a back suspension bracket, their reason and ways of elimination
7.2.3. Replacement of the shock-absorber of a back suspension bracket
7.2.4. Replacement of a spring of a back suspension bracket
7.2.5. Replacement of saylentblok of levers of a back suspension bracket
7.2.6. Adjustment of bearings of a back nave
7.2.7. Replacement of bearings of a back nave
7.2.8. Replacement of a beam of a back suspension bracket
7.2.9. Replacement of the stabilizer of cross stability of a back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








59d80679


7-2-9-zamena-stabilizatora-poperechnojj-ustojjchivosti-zadnejj-podveski.html

7.2.9. Replacement of the stabilizer of cross stability of a back suspension bracket

It will be required to you: keys "on 17" (two), the hammer.
1. Weaken an inhaling of bolts of fastening of back wheels, you will hang out a back part of the car and remove back wheels.
2. Turn off a nut of a bolt of fastening of the stabilizer of cross resistance to the lever of a back suspension bracket, holding a bolt from a provorachivaniye the second key.
3. Take a bolt, pay attention to existence of a washer.
4. Similarly turn off a nut and take a bolt from the opposite side.
5. Remove a rubber pillow of the stabilizer.
6. Shift from the place the hammer the stabilizer …
7. … also take it from the opposite side.
8. Establish details as it should be, the return to removal.

"previous page
7.2.8. Replacement of a beam of a back suspension bracket
following page"
8. Steering