8.4.5. Replacement of the pump of the hydraulic booster of steering

It will be required to you: keys "on 10", "on 12", "on 16", "on 22", a face head "on 12", the screw-driver with a flat edge, passatizh.

1. Take off a belt of the drive of the generator and pump of the hydraulic booster of steering (see. "Replacement of a belt of the drive of the generator and pump of the hydraulic booster of steering").

2. Turn out three bolts of fastening of a pulley of the pump of the hydraulic booster, holding a pump pulley from a provorachivaniye the screw-driver …	3. … also remove a pulley.

4. Holding the union from a provorachivaniye, the second key turn off a pipeline nut …	5. … also take the pipeline from the union.

NOTE Connection of the pipeline with the pump is condensed with a rubber ring which needs to be replaced at each separation.

6. Squeeze the unbent short moustaches of a collar of a passatizhama, shift a collar towards the pump …	7. … also remove a hose from a tube.

PREVENTION Take measures against an effluence of working liquid from pipelines, having muffled them, for example, wooden traffic jams.

8. Remove a collar from a tube.

9. Turn out two bolts of fastening of the pump of the hydraulic booster …	10. … also remove the pump from the car assembled with the soaking-up pipeline.

11. Turn out two bolts of fastening of a flange of the soaking-up pipeline …	12. … also disconnect the pipeline from a pump housing.

NOTE Connection of the pipeline with the pump is condensed with a rubber ring which needs to be replaced at each separation.

13. Establish details as it should be, the return to removal, and remove air from system of the hydraulic booster (see. "Pumping of system of the hydraulic booster of steering").