9-11-4-snyatie-i-ustanovka-rychaga-privoda-stoyanochnogo-tormoza.html
9.11.4. Removal and installation of the lever of the drive of the parking brakeAssembled remove the lever for replacement at wear or damage of the gear sector or a doggie.
It will be required to you: a key "on 12", the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
NOTE
The seat of the driver is removed for descriptive reasons. To get access to fastenings of facing and the lever of the parking brake, it is not required to remove a seat.
|
|
|
3. Disconnect a wire block from the switch of an alarm lamp of turning on of the parking brake.
|
|
|
|
5. Turn out two bolts of fastening of the lever of the drive of the parking brake to the body basis …
|
6. … also remove the lever.
|
7. Before installation on the car grease with jellied lubricant the gear sector of the lever.
|