Chevrolet Lanos (since 2004 release)
1. Car device
2. Recommendations about operation
3. Malfunctions in way
4. Maintenance
5. Engine
6. Transmission
7. Running gear
8. Steering
9. Brake system
9.1. Features of a design
9.2. Possible malfunctions of the brake system, their reason and ways of elimination
9.3. Pumping of a hydraulic actuator of the brake system
9.4. Check and adjustment of provision of a pedal of a brake
9.5. Main brake cylinder
9.6. Vacuum amplifier of brakes
9.7. Replacement of hoses and tubes of a hydraulic actuator of brakes
9.7.1. Replacement of brake hoses
9.7.2. Replacement of brake tubes
9.8. Removal and installation of a pedal of a brake
9.9. Brake mechanisms of forward wheels
9.10. Brake mechanisms of back wheels
9.11. Parking brake
10. Electric equipment
11. Body
12. Wheels and tires
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Advice to the beginning mechanic
18. Appendices
19. Schemes of electric equipment
 








59d80679


9-7-zamena-shlangov-i-trubok-gidroprivoda-tormozov.html

9.7. Replacement of hoses and tubes of a hydraulic actuator of brakes




Replace hoses and tubes if on them damages are found. Besides, we recommend in the preventive purposes to replace hoses through each 100 thousand km of a run or 5 years of operation of the car (depending on what will come earlier) even if they are externally not damaged. Rubber of hoses grows old, and they can unexpectedly burst when braking.

"previous page
9.6.1. Replacement of the vacuum amplifier of brakes
following page"
9.7.1. Replacement of brake hoses