|
9-9-2-zamena-supporta-perednego-tormoznogo-mekhanizma.html
9.9.2. Replacement of a support of the forward brake mechanismIt will be required to you: a key "on 12", a key hexagon "on 10", a key for bolts of wheels, capacity for discharge of brake fluid.
1. Remove a wheel.
|
GOOD ADVICE
Substitute capacity for discharge of the rest of brake fluid from a hose and the cylinder.
|
|
|
|
|
3. Turn out two bolts of fastening of a guide of blocks to a rotary fist …
|
4. … also remove a support assembled.
|
5. Establish a support as it should be, the return to removal. Before installation of bolts of fastening of a support to a rotary fist apply an anaerobic clamp of a carving on a carving. At installation of a brake hose use only new copper washers. After installation restore the level of brake fluid in a tank of the main brake cylinder and remove air from a hydraulic actuator of brakes (see. "Pumping of a hydraulic actuator of the brake system").
| 